Hello everyone and welcome to or welcome back to our blog, it's me Camila! In today's post, I'm going to be showing you how we recreated the Our Generation Starlight Bedtime Set!
First we did the plate! We drew around an Our Generation plate to make a circle but if you don't have one any circular object will work, the plate is 6.5 cm across.
Then, we cut them out and drew the design on both sides.
Then, coloured them in!
We covered them in tape but this is optional!
To finish the plates, we glued both sides together!
Now for the Oreos! First, we cut out 8 circles we drew using a glue stick lid.
We colored 4 brown.
Then covered the coloured ones in tape and glued them together with 2 circles in between.
For the milk, we used a glue stick lid and rolled paper to make a straw. Then, hot glued it in!
For the torch, we rolled paper and coloured it orange then did a smaller piece of paper that slightly covered the top and coloured it pink. Then, we used a small blue bead as a switch!
On the pink end, we added a yellow bead to be the light. We put hot glue on the end and used greaseproof paper to make it flat, we learnt this from Totally Rudy on YouTube!
Finally, for the unicorn picture we drew it as similar as possible on a piece of paper and covered it in tape to make it last longer. Then, we got glued the wool as a handle!
I hope you enjoyed!
No comments:
Post a Comment